How to assemble a computer desk, if you search in Google, then the page will have many options on how to do this. We will try to tell you what is required for this, what products are available, and what are the subtleties in this seemingly simple matter.
The configuration of the computer model differs from the usual one with various additional shelves on top, and in some cases a pull-out keyboard stand.
To assemble any table, we need a minimum set of tools. Namely:
several types of screwdrivers, including Phillips and flat;
screwdriver with attachments for quick screwing in of screws;
ruler, protractor and tape measure;
Allen wrenches may be needed.
To begin with, it is worth laying out all the tools in a convenient order on the surface closest to the installation.
Preparing for assembly
The first thing to do before starting our process is to make sure that all the parts of the future computer desk have been brought to you. To do this, you should check the instructions, where there is a detailed list of components. Particular attention should be paid to chops, screws and plugs. If everything is in order, it is worth inspecting the parts for scratches and chips.
Next, we proceed directly to the installation. It doesn't matter to you what the product is made of, the main thing is to treat everything with attention and care. Make sure you have special socket wrenches and all small hardware included.
Usually, there are already special marks on the surfaces of the product for screwing in self-tapping screws. If not, a ruler and protractor will help you.
We collect pedestals and individual elements
It is better to assemble cabinets and drawers separately. We mount the base of the pedestals as follows: it is necessary to lay out all the parts (bottom, top, sides) on the floor so that during assembly it is located on the back. Screw the rails and legs to the bottom, the eccentrics must be installed in the slots. We tighten all the elements of the product with screws using socket wrenches.
There is nothing left for us, to collect all the large elements. To do this, we need all the same keys, tighten the screws to attach the tabletop to the sides, install boxes and add-ons. If it seems to you that you do not have the proper experience to mount the table, then it is better to contact a specialist.